i have digi 001 & yamaha 01V mixer (oms in/out).is there anyone who is able to control fader's aux sends via midi ,like cubase?

It will emulate 8 faders of the Peavy PC 1600. So choose the PC 1600 under Setups>Peripherals>Midi Controllers.

by the way , you can control all the24ch under a pc 1600 mode from the o1v . just play with your o1v's midi controller list a bit ... also select a 2nd or 3rd pc 1600 sets (Peripherals)under a different midi output and channels . if i'm not mistaken : faders 1-8 are controllers 0-8 faders 9-16 are controllers 0-8 but in bank you should change to bank 1 and not 0 hope it helps

on the 01v: remote page 3, set the midi stringparameters so PT receive the correct midi message. I can't remember the exact data anymore but i think it was something like BF 40 00 END for channel 1 volume. in PT you must enable the controler. goto: setup ->peripherals ->midi controlers and select one. i also can't remember which. (sorry) i worked with this system for a while, but after a while i was quicker with keyboard and mouse than with the 01v. for more detailed info you should do a quicksearch on this topic because there have been some questions some time ago. greetings, tantejo